General

Communication Modes
GPRS/EDGE/HSPA and CDMA 1xRTT packet data, UDP and SMS

Messages
20,000 buffered messages

Geofence
25 radial and 25 polygonal geofences onboard device, user defineable
Automatic over air firmware and configuration updates via PULS


GPS

Location Technology
50+ channel GPS (with SBAS)
SBAS: WAAS, EGNOS, MSAS, GAGAN

Location Accuracy
2.0 meter CEP (with SBAS)

Tracking Sensitivity
-162dBm

Acquisition Sensitivity
-148dBm

AGPS Capable


Cellular

Data Support
SMS, UDP packet data

Operating Bands (MHz)
​GSM/GPRS:

  • 850/900/1800/1900

CDMA/1XRTT:

  • 850/1900

HSPA/UMTS:

  • 800(VI)/850(V)/900(VIII)/1700(IV)/1900(II)/2100(I)

Transmitter Power
GSM/GPRS:

  • 850/900, 32.5 dBm
  • 1800/1900, 29.5 dBm

CDMA/1XRTT:

  • 850, 24 dBm
  • 1900, 23 dBm

HSPA/UMTS:

  • All bands, 23 dBm

HSPA Data Rates
5.6 Mbps upload/7.2 Mbps download

HSPA Fallback
EDGE/GPRS/GSM quad band
EDGE MCS1-MCS9
3GPP Release 6

Interfaces

OBD-II Interface
J1850 PWM, J1850 VPW, ISO-9141-2, ISO-14230, KWP2000, ISO-15765, CAN

Outputs
None

Bluetooth
Bluetooth 4.0 Dual Mode (optional fit)

Status LEDs
GPS, OBD-II and cellular

Environmental

Temperature
-30º to +75º C (operating); -40º to +85º C (storage)

Humidity
95%RH @ 50º C non-condensing

Shock and Vibration
SAE J1455

EMC/EMI
SAE J1113; FCC–Part 15B; Industry Canada

RoHS Compliant


Electrical

Operating Voltage
9-16 VDC Vehicle Systems

Internal Battery
200mAH

Sleep Mode
Ultra low power sleep <3mA


Physical

Dimensions
43 x 64 x 25 mm

Weight
<52 g Enclosure
Rugged textured plastic enclosure

Communications
OBD, Cellular and GPS

Accelerometer
3 axis 16g, sampling at 400Hz for driver behavior and crash detection


Connectors, SIM Access

Connection Type
Built-in OBD-II/EOBDII interface via J1962 compliant connector

SIM Access
Internal
SIM fitted during manufacturing


Certifications

Fully certified FCC, CE, IC, PTCRB, applicable carriers

Mounting

Built-in OBD-II connector
Self-adhesive mounting with OBD-II extender cable

Key Features

Superior GPS & cellular performance
OBD-II connector and interface to read vehicle bus data
Built-in accelerometer for driver behavior capabilities and impact detection
Advanced crash detection
Pre and Post Vehicle impact data capture capabilities
Power sleep modes
Backup battery

Optional Features/Functions

OBD-II Connector Cables
Splitters and Extensions
Serial Cable
Optional Bluetooth

OBD Data Extraction
Detection
Automatic detection of vehicle interface services

Extraction
Transmission of standard EOBD codes, plus manufacturer specific codes which are made available by the embedded OBD firmware stack

Scripts
Download of vehicle specific diagnostic scripts dependant on vehicle model variant


Development Support Options

Customized hardware and software development available on request
Download the LMU-3030 Datasheet


Competitive Price, Competitive Technology, Competitive Edge

The LMU-3030 full-featured tracking unit from CalAmp features small size, superior GPS performance, OBD-II interface, backup battery, and a 3-axis accelerometer. These features enable the LMU-3030 to access vehicle diagnostic interface data, track vehicle speed and location, plus detect hard braking, cornering, acceleration and capture pre and post-impact data. Superior internal antennas for both cellular and GPS eliminate the need for professional installation and make the LMU-3030 install quick, easy and inexpensive. Messages are transported across the cellular network using enhanced SMS or UDP messaging providing a reliable communications link between the device and your application servers. The LMU-3030 is designed to dramatically reduce cost, power and size while significantly improving field reliability in 12 volt passenger or light-duty vehicles.

Flexibility

The LMU-3030 employs CalAmp’s advanced industry leading on-board alert engine, PEG™(Programmable Event Generator) to monitor external conditions and support customer-defined exception-based rules to meet your application requirements. PEG monitors the vehicle environment and responds instantaneously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input and other event combinations. This behavior can be programmed by CalAmp before shipment, at a customer’s facility, or over-the-air once the unit has been fielded.

Over-the-air Serviceability

The LMU-3030 leverages CalAmp’s management and maintenance system, PULS™ (Programming, Updates, and Logistics System), for over-the-air configuration parameters, PEG rules, and firmware. This out-of-the-box hands free configuration and automatic post-installation upgrades can monitor unit health status across your customers’ fleets to identify issues before they become expensive problems.